D A Deiderich, R C Trueworthy, P Gill, A M Cader, W E Larsen
J Clin Invest.
1976;
58(3):642–653
doi:10.1172/JCI108511
This article Copyright © 1976, The American Society for Clinical Investigation
Abstract
|
Full text
|
PDF
I
n eight patients with sickle cell anemia, weekly extracorporeal carbamylation of about 20% of the circulating red cell mass was carried out for 2 yr or longer. At each visit, a mean of 1.3+/-0.2 mol of cyanate were incorporated per mole of hemoglobin in the carbamylated erythrocytes. Within 3 mo, a stable level of about 35-50% of the circulating erythrocytes was carbamylated. This quantity and degree of hemoglobin carbamylation produced a decrease in mean whole blood P50 from 33 to 26 mm Hg. During the first 3 mo of carbamylation, the mean hemoglobin increased from 6.4 to 9.1 g/100 ml, while mean absolute reticulocytes decreased by 58% and circulating irreversibly sickled erythrocytes decreased by 65%. The mean red cell life span increased from 13 days before treatment to 21.6 days after 3 mo of carbamylation. Beyond the 3rd mo of carbamylation, blood P50, hemoglobin, and reticulocytes remained quite stable. No toxic effects of extracorporeal carbamylation of erythrocytes were noted. The capacity of blood to release oxygen at 30 mm Hg PO2 increased from 4.3 to 5.0 cm3/100 ml blood during carbamylation. The overall frequency of severe painful crises decreased by about 80% during carbamylation. Before carbamylation, 34% of the crises were induced by a concomitant illness, usually an infection. During carbamylation, the incidence of induced crises decreased 50% while spontaneous crises virtually disappeared. The marked improvements in hematologic parameters and the decreased frequency of severe painful crises observed during this study offer sufficient promise to warrant further exploration, hopefully using more efficient techniques, of the clinical efficacy of extracorporeal erythrocyte carbamylation in sickle cell anemia.
This file is in Adobe Acrobat (PDF) format.
If you have not installed and configured the Adobe Acrobat Reader on your system.
Having trouble reading a PDF?
PDFs are designed to be printed out and read, but if you prefer to read them online, you may find it easier if you increase the view size to 125%.
Having trouble saving a PDF?
Many versions of the free Acrobat Reader do not
allow Save. You must instead save the PDF from the JCI Online page you downloaded it from. PC users:
Right-click on the Download link and choose the option that says something like "Save Link As...".
Mac users should hold the mouse button down on the link to get these same options.
Having trouble printing a PDF?
- Try printing one page at a time or to a newer printer.
- Try saving the file to disk before printing rather than opening it "on the fly." This requires that you
configure your browser to "Save" rather than "Launch Application" for the file type "application/pdf", and can
usually be done in the "Helper Applications" options.
- Make sure you are using the latest version of Adobe's Acrobat Reader.